CAT6 I/O Shutter Black

BNIO-CAT6-Shutter-Black
 
Description :
Bestnet Category 6 Shutter Black series connectors are engineered to provide superior performance and reliability, supporting Gigabyte Ethernet applications and beyond. The advanced printed circuit board design is tuned to provide optimum signal quality with maximum headroom, allowing it to exceed TIA/EIA Category 6 performance standards. It offers superior signal quality and noise reduction due to its enhanced Near-End and Far-End Crosstalk cancellation and minimum return losses. The flat back IDC construction offers faster installation through its straight through in-line termination design and one piece snap-on termination cap.
   
Features :
» Easy and Fast Termination: PCB design eliminates the need to split pairs, and allows faster and easier termination, reducing the installation time.
» Cap Down Termination: One-piece termination cap reduces installation time by allowing simultaneous 4-pair termination.
   
Specifications :
» Meet ANSI/TIA/EIA-568-B.2 Category 6
» Meet ISO/IEC Generic Cabling Standard 11801
» Meet CENELEC Generic Cabling Standard En50173
 
Electrical :
According to UL 1863  
Current Roting 1.5Amp Max
Voltage Roting 150 Volts
Contact Resistance 20m-ohm
Insulation Resistance 500M-ohm
Dielectric Withstand Voltage 1000VAC RMS, 60Hz 1MIN.
 
Materials :
Housing ABS UL94V-0
IDC PC UL94V-0, Accept 22-26 AWG Solid Cable
PCB FR4 1.6m/m thickness, 2 layer
Contact 0.45m/m Phosphor bronze with Gold plating on contact area.
 
Typical Applications :



   
Mechanical Data :
Number of RJ45 CAT6 I/O 2
Number of contacts 8P8C/jack
Operating temperature range -10°C to 60°C
Assembly temperature range -10°C to 60°C
Storage temperature range -40°C to 70°C
Humidity 95% (non-condensing)
Contact material Spring steel
Contact surface Gold over nickel plating
Housing material unshielded PC
 
 
Description Standard value Relevant standard Typical Value (at 20OC)
Insertion cycles > 750 ISO/IEC 11801 2nd Ed. > 750
 
Electrical Data :
Description Standard value Relevant standard Typical Value (at 20OC)
Dielectric strength > 1000 V dc IEC 60512-4a > 1000 V eff
Insulation resistance > 500 MΩ IEC 60512-3a > 500 MΩ
Voltage rating 72V DC ISO/IEC 11801 -
Input to output resistance 200 m Ω EN 60512-2-1 < 200 mΩ
   
Tested Configuration :

 
UnShielded (20°C) [dB] :
Frequency (MHz) Insertion Loss NEXT all pair combinations Return Loss
1.0 0 80.4 25.1
4.0 0 76.1 22.3
10.0 0 71.9 23.3
16.0 0 67.6 22.3
20.0 0 63.1 28.3
31.25 -0.01 60.4 24.4
62.5 10.04 56.7 28.6
100 -0.09 50.9 23.2
125 -0.12 48.4 19.7
155 -0.16 45.2 18.0
175 -0.18 44.9 19.7
200 -0.22 41.7 16.4
250 -0.28 37.2 20.2
   
Insertion Loss :

   
   
 
   
All Right Reserved