Cat 6 RJ45 Barrel Panel Mount

BNBRL-CAT6-PM
 
Description :
Bestnet The coupler module is designed to be flexible enough to be used for many different applications, such as consolidation points, cross connects, to extend a patch cord or in furniture applications such as the DeskBox. It enables the connection of services to the rear of patch panels by means of normal patch cords and also allows connection of services from switches that have their output interface on the rear, eliminating the need for through panels, spaces between patch panels and special cords with one plug and one jack each. In the industrial market, it is used for point to point connections in the Network Interface (NI) on the automation island or apparatus, or in the Intermediate Distributor (ID).
   
Features :
» Fulfils all Cat. 6 requirements specified in the relevant cabling standards (ISO/IEC 11801, EN 50173 and TA/EIA 568B/C)
» Achieves Class E performance when installed as part of an Bestnet permanent link
» Compatible with Cat. 6 standard plugs
» Fits into all Bestnet patch panels,most Bestnet outlet and many third party platforms through the use of adapters, e.g. freenet module holder plate, snap-in, Adapter #1 and keystone
» Very short design for applications with restricted space
   
Standards :
» IEC 60603-7, IEC 60603-7-1 Electrical Characteristics of the Telecommunication Outlet
» ISO/IEC 11801, Second Edition: September 2002, Info rmation Technology Generic Cabling for customer premises
» EN50173-1: May 2007: Information Technology – Gener ic Cabling Systems Part 1: General Requirements
» ANSI EIA/TIA 568C.2: General requirements – Commerc ial Building Telecommunications Cabling Standard
» Part 2: Balanced Twisted-pair Cabling Components
   
Typical Applications :



   
Mechanical Data :
Number of RJ45 jacks 2
Number of contacts 8P8C/jack
Operating temperature range -10°C to 60°C
Assembly temperature range -10°C to 60°C
Storage temperature range -40°C to 70°C
Humidity 95% (non-condensing)
Contact material Spring steel
Contact surface Gold over nickel plating
Housing material unshielded PC
 
 
Description Standard value Relevant standard Typical Value (at 20OC)
Insertion cycles > 750 ISO/IEC 11801 2nd Ed. > 750
 
Electrical Data :
Description Standard value Relevant standard Typical Value (at 20OC)
Dielectric strength > 1000 V dc IEC 60512-4a > 1000 V eff
Insulation resistance > 500 MΩ IEC 60512-3a > 500 MΩ
Voltage rating 72V DC ISO/IEC 11801 -
Input to output resistance 200 m Ω EN 60512-2-1 < 200 mΩ
   
Tested Configuration :

 
UnShielded (20°C) [dB] :
Frequency (MHz) Insertion Loss NEXT all pair combinations Return Loss
1.0 0 80.4 25.1
4.0 0 76.1 22.3
10.0 0 71.9 23.3
16.0 0 67.6 22.3
20.0 0 63.1 28.3
31.25 -0.01 60.4 24.4
62.5 10.04 56.7 28.6
100 -0.09 50.9 23.2
125 -0.12 48.4 19.7
155 -0.16 45.2 18.0
175 -0.18 44.9 19.7
200 -0.22 41.7 16.4
250 -0.28 37.2 20.2
   
Insertion Loss :

   
   
 
   
All Right Reserved